If the photograph is clicked, it grows.

Tektronix CSA8000B Communication Signal Analyzer main Frame JPY450,000　1stock	com225

Self Test Trigger Error Vertical Systems; Rise Time/Bandwidth – Determined by the sampling modules used. Vertical Resolution – 14 bits over the sampling modules’ dynamic range. Horizontal System; Main and Magnification View Time bases – 1 ps/div to 5 ms/div in 1-2-5 sequence or 1 ps increments. Time Interval Accuracy – Horizontal sensitivity <21 ps: 1 ps + 1% of interval. Horizontal sensitivity ≥21 ps: 8 ps + 0.1% of interval (short-term optimized mode). 8 ps + 0.01% of interval (locked to 10 MHz mode). Horizontal Deskew Range: –500 ps to +100 ns on any individual channel in 1 ps increments. Record Length – 20, 50, 100, 500, 1,000, 2,000, 4,000 samples. Magnification Views – In addition to the main timebase, the CSA8000 supports two magnification views. These Horizontal System Main and Magnification View Timebases – 1 ps/div to 5 ms/div in 1-2-5 sequence or 1 ps increments. Time Interval Accuracy – Horizontal sensitivity <21 ps: 1 ps + 1% of interval. Horizontal sensitivity ≥21 ps: 8 ps + 0.1% of interval (short-term optimized mode). 8 ps + 0.01% of interval (locked to 10 MHz mode). Horizontal Deskew Range: –500 ps to +100 ns on any individual channel in 1 ps increments. Record Length – 20, 50, 100, 500, 1,000, 2,000, 4,000 samples. Trigger Sources – External direct trigger. External pre-scaled trigger. Internal clock trigger: Internally connected to direct trigger. Clock recovery triggers (from optical sampling modules) – internally connected to pre-scaled trigger. Trigger Sensitivity – External direct trigger output: 50 mV, DC –4 GHz (typical). 100 mV, DC –3 GHz (guaranteed). Pre-selected trigger input: 800 mV, 2 to 3 GHz (guaranteed). 600 mV, 3 to 10 GHz (guaranteed). 1000 mV, 10 to 12, 5 GHz (typical). Math/Measurement; Measurement Set; Amplitude Measurements: High, Low, Amplitude, Max, Mid, Min, Peak-to-peak, + Overshoot, – Overshoot, Mean, Cycle Mean, RMS, Cycle RMS, AC RMS, Gain. Timing Measurements: Rise, Fall, Period, Frequency, + Cross, – Cross, + Width, – Width, + Duty Cycle, – Duty Cycle, Burst Width, Delay, Phase. Area Measurements: Area, Cycle Area. Eye Pattern/Optical Measurements: Extinction Ratio (Ratio, %, dB), Eye Width, Eye Height, Crossing %, Duty Cycle Distortion, Jitter (p-p, RMS), Noise (p-p, RMS), Q-Factor, SNR, Average Optical Power. Cursors – Dot, vertical bar and horizontal bar cursors. Waveform Processing; Up to eight math waveforms can be defined and displayed using the following math functions: Add, Subtract, Multiply, Divide, Average, Differentiate, Exponentiate, Integrate, Natural Log, Log, Magnitude, Min, Max, Square Root and Filter. In addition, measurement values can be utilized as scalars in math waveform definitions. Power Requirements:Line Voltage 90-132Vrms or 180-250V Dimention:457(W)-343(H)-419(D),20.8kg, Maker Price:JPY2,660,000-

E-Manual*2,Power Code,Mouse,PS/2 Adapter,Touch Pen*2, Compact Keyboard,Front Cover,