Yokogawa AP9945 10Gbps Bit Error Rate Testers JPY600,000 1stock
com314
PPG Function • Optional variable output supports multiple bit rates: 9.95 Gbit/s to 11.32 Gbit/s, variable in steps of 1 kHz • Output amplitude: 0.5 Vp-p to 2.0 Vp-p, variable in steps of 10 mV • Offset: 2.0 V to +3 V, variable in steps of 10 mV • Crosspoint: 30% to 70%, variable in steps of 1% • Data and data
ED Function • CDR function included as standard feature The CDR signal extracts the clock from the data signal and performs synchronization when a data signal is the only input. In optical communications, the CDR function is a useful tool because the data signal is often transmitted alone. • In addition to the CDR input port, there are ports for inputting separate data and clock signals. When this ports are used, the phases of the data and clock must be matched externally. • Input ranges: 0.1 Vp-p to 0.7 Vp-p (with CDR), 0.1 Vp-p to 0.6 Vp-p (without CDR)
734001-SG1-F10-F20-T SG1: Built-in SG F10 : No generator 1/SG1 required F20 : No generator 2/F1 required T : UL/CSA AC125V straight,3 to 2pin Converter
)
)
)
)
)
)
)
)
)
)
