If the photograph is clicked, it grows.

Agilent U8903A /200 100KHz FFT Audio Analyzer
JPY650,000 1stock
log492











Calibrated Aug-2018

Analog generator
Balanced XLR
Unbalanced BNC
Common mode XLR

Balanced 100 Ω, 600 Ω
Unbalanced 50 Ω, 600 Ω

Maximum output power into 600 Ω
Balanced (600 Ω) 20 dBm
Unbalanced (600 Ω) 14 dBm

Sine, dual sine, and variable phase
Frequency Range 5 Hz to 80 kHz
Accuracy 5 ppm
Resolution 0.1 Hz
Output Range (balanced) 0 to 16 Vrms Range (unbalanced/common) 0 to 8 Vrms
Amplitude accuracy ±1%
Amplitude resolution 1 μVrms (limited to five digits of resolution)
Flatness – 5 Hz to 20 kHz – 5 Hz to 80 kHz – ±0.01 dB – ±0.1 dB
THD + N at 1 kHz, 1 Vrms ≤ -95 dB (at 23 °C ±5 °C) 20 Hz to 20 kHz bandwidth ≤ -92 dB (from 0 °C to 55 °C)

Analog analyzer
Connection type
Balanced XLR
Unbalanced BNC
Coupling DC, AC
Measurement bandwidth Low 30 kHz High 100 kHz
Input ranges 400 mV to 140 Vrms
Measurement range < 1 μV 2 to 140 Vrms
Maximum rated input 200 Vp for altitude up to 3000 m Impedance Balanced 200 kΩ Unbalanced 100 kΩ
THD + N (at 1 kHz, 1 Vrms, 20 Hz to 20 kHz bandwidth)
≤ -101 dB

Amplitude
DC measurement range 0 V to ±200 V
DC accuracy ±1% AC accuracy (20 Hz to 100 kHz) ±1% (at 23 °C ±5 °C) ±2% (from 0 °C to 55 °C)
AC level detection RMS, Peak-to-Peak, Quasi Peak Frequency Range 10 Hz to 100 kHz
Minimum input 1 mV (S/N > 40 dB)
Accuracy 5 ppm
Resolution 6 digits

opt200: Analog 2ch interface
Calibration certificate